Author Topic: F3P Models and Specs  (Read 24259 times)

Offline angelwing

  • Advanced Class Poster
  • ***
  • Posts: 153
F3P Models and Specs
« on: 09, November 2012, 12:57:19 PM »

My Own design "Yofiel" Biplane


Wingspan  720mm
Fuselage length 935mm
RTF Weight inc Battery 106g
4 x HS 5035HB's
Hyperion or Turnigy 2s 180mah
YGE 4 esc with double diodes as a voltage dropper

Top wing has Anhedral, Bottom wing Dihedral and the Tailplane also has Anhedral.
If the wind dies down enough the indoor test flight is tonight, I havent made a transport box yet!
[size=78%] [/size]




Offline Matt Hoyland

  • Administrator
  • FAI Class Poster
  • *****
  • Posts: 1,275
    • HuiYang - Matt Hoyland
  • Flying Class: FAI Pilot (P&F)
  • Other Status: Contest Director
Re: F3P Models and Specs
« Reply #1 on: 09, November 2012, 07:03:50 PM »
Looks good Andy.  Hope to see it fly on Sunday!

Offline angelwing

  • Advanced Class Poster
  • ***
  • Posts: 153
Re: F3P Models and Specs
« Reply #2 on: 10, November 2012, 05:02:17 PM »
4g heavier no as Ive added a M5 steel nut to the nose to tweak the CG


Offline angelwing

  • Advanced Class Poster
  • ***
  • Posts: 153
Re: F3P Models and Specs
« Reply #3 on: 18, November 2012, 04:49:37 PM »
Be good to see some pictures of the Disney's / other models and specs guys


Offline barnesyboy

  • Intermediate Class Poster
  • **
  • Posts: 85
  • Flying Class: Intermediate Pilot
  • Other Status: None
Re: F3P Models and Specs
« Reply #4 on: 19, November 2012, 07:51:56 PM »
My loaner (because I know you were dying to know the specs) was a about 70 quid all up

Hobby King Galaxy
Motor: Whatever came in the kit
ESC: unbranded 10amp
Servos: blue ones
RX: Orange one
Lipo: 2 cells
Weight: Think Wot 4


« Last Edit: 19, November 2012, 07:55:09 PM by barnesyboy »

Offline Matt Hoyland

  • Administrator
  • FAI Class Poster
  • *****
  • Posts: 1,275
    • HuiYang - Matt Hoyland
  • Flying Class: FAI Pilot (P&F)
  • Other Status: Contest Director
Re: F3P Models and Specs
« Reply #5 on: 19, November 2012, 08:26:00 PM »
Disney
 
Glavak Motor with 9x2.5 Carbon Prop
Flighttech 6A ESC
LSX065 servos on elevator and rudder
1x Hitec HS-5035HD on ailerons.
Futaba R6004FF Rx
180mAh 2S LiPo
RTF Weight = 105g

Offline Gary Holland

  • Clubman Class Poster
  • *
  • Posts: 26
  • Flying Class: None
  • Other Status: None
Re: F3P Models and Specs
« Reply #6 on: 19, November 2012, 09:31:36 PM »
Disney

Turnigy 6amp ESC
Turnigy 2204-14 motor (lightened)
SD100's elevator/rudder
SD 150 ailerons
Orange 4 channel Rx
Hyperion 180 packs
SG carbon prop (no idea what size though, it was a freebie from AW  ;) )
RTF weight 105grms

Offline Ashley Hoyland

  • Global Moderator
  • FAI Class Poster
  • *****
  • Posts: 2,122
  • Flying Class: FAI Pilot (P)
  • Other Status: Contest Director
Re: F3P Models and Specs
« Reply #7 on: 19, November 2012, 10:20:52 PM »
Disney

Hacker A15 10S
Flighttech 6amp ESC.
3 x JR ES 316
Spectrum micro receiver
Hyperion 240mAh
Prop GWS 8 x 4.3
RTF weight  118 grams

Offline David Kirk

  • Advanced Class Poster
  • ***
  • Posts: 135
  • Flying Class: Masters Pilot
  • Other Status: None
Re: F3P Models and Specs
« Reply #8 on: 20, November 2012, 06:49:08 PM »
Helix

Axi 2203/52
Jeti 08 Advance ESC (lightened a little)
Glavak 9 x 3.5 but now more like 8.7 x 3.5
Hyperion 2s 180's (lightened a little)
LSX110 on rudder
LSX065 on elevator and aileron
All servos running directly on 8.4v
Jeti R6G (3.5g) receiver running on 8.4v with telemetry

Made from normal Depron but only lightly milled. AUW 132g :-(

Would give the Disney's a run for the money if the weight came down to 105g I reckon (Germans build sub 100g versions). Just needs Depron Aero and some MTF milling.

So ugly that the forum software refused to upload a picture (I haven't got one really).

Dav

Offline Gary Holland

  • Clubman Class Poster
  • *
  • Posts: 26
  • Flying Class: None
  • Other Status: None
Re: F3P Models and Specs
« Reply #9 on: 21, November 2012, 02:45:06 PM »
Don't worry Dave, I have  ;)

Offline barnesyboy

  • Intermediate Class Poster
  • **
  • Posts: 85
  • Flying Class: Intermediate Pilot
  • Other Status: None
Re: F3P Models and Specs
« Reply #10 on: 21, November 2012, 07:43:19 PM »
that pic dosnt make it look ant were near ugly enough

BB

Offline angelwing

  • Advanced Class Poster
  • ***
  • Posts: 153
Re: F3P Models and Specs
« Reply #11 on: 25, November 2012, 07:58:37 PM »
Yofiel is now flying very nice, so theres no excuse for me not to enter the next comp other than my thumbs, but thats my problem....


Yofiel V2 is already drawn with even more milling where it matters and less where it doesn't. slightly revised wing shape and ailerons and a longer nose to allow me to keep the weight the same as I'm currently flying at, not saying any more than that  ::)






Offline BrianH2

  • Intermediate Class Poster
  • **
  • Posts: 95
    • RC Hotel
  • Flying Class: Clubman Pilot
  • Other Status: None
Re: F3P Models and Specs
« Reply #12 on: 06, December 2012, 01:00:34 PM »
Thought I'd add my two-penneth worth !
Disney
2204-14 motor (not lightened!)
Turnigy 6A esc
D47s servos all round
Hyperion 120mAh (lightened)
RTF 109gms
 
« Last Edit: 17, December 2012, 12:43:58 PM by BrianH2 »

Offline paul wilco

  • Intermediate Class Poster
  • **
  • Posts: 63
  • Flying Class: None
  • Other Status: Clubman Pilot
Re: F3P Models and Specs
« Reply #13 on: 06, December 2012, 06:54:24 PM »
Love the scheme on the Disney, looks awesome Brian. Cant wait to see it fly pal.

Offline BrianH2

  • Intermediate Class Poster
  • **
  • Posts: 95
    • RC Hotel
  • Flying Class: Clubman Pilot
  • Other Status: None
Re: F3P Models and Specs
« Reply #14 on: 06, December 2012, 09:59:39 PM »
Love the scheme on the Disney, looks awesome Brian. Cant wait to see it fly pal.
Thanks mate!  You really need to get yours done - I promise you that you'll love it !!   ;)
Haven't managed to get much time on it - and there's still a bit of 'tuning' required but its already feeling pretty good in the air!!