Author Topic: F3p Model Transportation  (Read 4578 times)

Offline Josh & Andy James

  • Clubman Class Poster
  • *
  • Posts: 27
  • Flying Class: None
  • Other Status: None
F3p Model Transportation
« on: 13, December 2012, 01:12:12 PM »
Hi All
I dont know if this has been previously discussed, Im going to build a transport box and wondered if anybody had used this stuff it looks like a 'Correx' type material
 
 Proplex 2mm - Plastic Surface Protection - Twin Wall Plastic Board
http://www.protection.co.uk/products/proplex-2mm-corrugated-twin-wall-plastic-board/
 
Thanks
 
They do 3&4mm as well
http://www.protection.co.uk/products/proplex-3mm-surface-protection-plastic-sheeting/
http://www.protection.co.uk/products/proplex-4mm-corrugated-plastic-sheeting/
 
 
« Last Edit: 14, December 2012, 09:04:57 AM by Josh & Andy James »

Offline BrianH2

  • Intermediate Class Poster
  • **
  • Posts: 95
    • RC Hotel
  • Flying Class: Clubman Pilot
  • Other Status: None
Re: F3p Model Transportation
« Reply #1 on: 13, December 2012, 04:56:53 PM »
Hi Andy,
That's the right stuff but I think 2mm might be a bit thin....unless you're going to only use it as a skin on some kind of frame ?
cheers,
Brian

Offline angelwing

  • Advanced Class Poster
  • ***
  • Posts: 153
Re: F3p Model Transportation
« Reply #2 on: 13, December 2012, 07:25:39 PM »
Hi Andy


4mm is available to pick up off the shelf in Leeds,
I'm sure its available from most sign manufacturers too if you ask nicely


http://www.theplasticpeople.co.uk/advanced_search_result.php?keywords=correx&search_in_description=1&x=0&y=0

Offline Josh & Andy James

  • Clubman Class Poster
  • *
  • Posts: 27
  • Flying Class: None
  • Other Status: None
Re: F3p Model Transportation
« Reply #3 on: 14, December 2012, 11:35:48 AM »
Hi Guys
Just found a local supply 8x4 4mm and quite cheap too
 
Andy