Author Topic: Loaded Dice 60E Setup  (Read 126 times)

Offline Steve Bennington

  • Clubman Class Poster
  • *
  • Posts: 13
Loaded Dice 60E Setup
« on: 12, July 2019, 04:07:27 pm »
All,


Just acquired this model, any advice on control throws and setup would be much appreciated


Thanks


Steve




Offline Graham Gooch

  • GBRCAA Member
  • Intermediate Class Poster
  • *****
  • Posts: 50
  • Flying Class: Clubman Pilot
  • Other Status: Clubman Pilot
Re: Loaded Dice 60E Setup
« Reply #1 on: 13, July 2019, 07:11:08 am »
Hi Steve,


I had one of these for my son and if I remember correctly, Ailerons 8mm, 6mm ( had differential mixed in) Elevator 8mm up and down and Rudder 30mm each way, with 20% expo on all surfaces.


If not quite right, it's a good starting point.


Great model as my Son passed his BMFA B rating at the age of 11 with his.


Graham

Offline Mike Wood

  • GBRCAA Member
  • FAI Class Poster
  • *****
  • Posts: 1,587
  • F3A Precision Aerobatics
  • Flying Class: FAI Pilot (P)
  • Other Status: FAI Pilot (P)
Re: Loaded Dice 60E Setup
« Reply #2 on: 13, July 2019, 10:42:17 am »
Here's his article on his original Loaded Dice.

(Each page can be clicked on to zoom right in)

Mike

http://pulling-gz.blogspot.com/2013/02/loaded-dice.html