Search

[Stuart Mellor]

My spats won't fit 3" wheels so I printed some. Strip very soggy at the moment

[Mike rieder]

They look great, i have the same issue with a muddy/ grass site. Are you able to send me the file and i will see if a mate will print for me?

[Stuart Mellor]

Hi Mike - No problem but   - they are 34mm wide (30mm internally)  - so you will probably need longer axles.
I initially gave them 10 mm clearance above the wheel - which I now realise is probably a bit too much. So redesigning tonight with 5mm clearance.
Pm me your e mail & I'll send you the current one & the new one tomorrow. They are drawn in Fusion 360.
Stuart

[Mike rieder]

Thanks Stuart.

[Stuart Mellor]

Hi Mike. Have designed a MK2 which is much easier to fit & removes in a jif. Will send if you want.

[Mike rieder]

Yes please, did you get my pm with email address.

[Stuart Mellor]

No Mike I didn't!

[Stuart Mellor]

Hi Mike - there seems to be something wrong with the pm system -if both of us can't receive our pms. Have received/send pms to others ok.
Stuart

[Stuart Mellor]

Working OK!

[Chris Bond]

https://www.bondaero.co.uk/Carbon_open_floor_spats/p1085152_20188139.aspx

[Stuart Mellor]

Easy to scrape out all the crap! I like it.

[Mike rieder]

Hi Stuart, mud gard now printed and fitted, working well thanks.